Discussion:
am335x evmsk screen init:id"00" respawning too fast disabled for 5 minutes yocto sumo
(too old to reply)
n***@polycaptil.fr
2018-11-28 15:50:02 UTC
Permalink
Hello everybody

here is an introduction of my situation :

I build a custom board from schematic of sitara AM335x-evmsk starter kit.
I succeed to make a custom OS with yocto (krogoth version) and to boot this OS (embedded Linux) on my custom board.

This custom board contain a touchscreen (same touchscreen like in the AM335x-evmsk starter kit).

All worked fine on this board while I used krogoth version on yocto.

my problem :

Few time ago, I decided to migrate to sumo version of yocto.
I build with success the OS (embedded Linux) with yocto sumo version for my custom board, but when I try to boot this OS, it's stop/lock and print the following message :

"INIT:Id'00' respawning too fast : disabled for 5 minutes" (I put a screenshot of this message ridden on putty).
Every 5 minutes I got this message and I can't acces to the user session on putty and on the touchscreen, all board is locked.

I don't understand why this problem appear when I build a OS with the sumo version on Yocto.
I have not this problem when I build a OS with the krogoth version on yocto.

Somebody can help me to solve this problem ?
what can I do ?

NS
Josef Holzmayr
2018-11-28 19:55:30 UTC
Permalink
Howdy!
Post by n***@polycaptil.fr
Hello everybody
I build a custom board from schematic of sitara AM335x-evmsk starter kit.
I succeed to make a custom OS with yocto (krogoth version) and to boot this OS (embedded Linux) on my custom board.
This custom board contain a touchscreen (same touchscreen like in the AM335x-evmsk starter kit).
All worked fine on this board while I used krogoth version on yocto.
Few time ago, I decided to migrate to sumo version of yocto.
"INIT:Id'00' respawning too fast : disabled for 5 minutes" (I put a screenshot of this message ridden on putty).
Every 5 minutes I got this message and I can't acces to the user session on putty and on the touchscreen, all board is locked.
This is probably because you are basing off something that sets
SERIAL_CONSOLES for the yocto-kernel, like
http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto/tree/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf?h=master#n23

If you are using a custom tree which does not use the special driver for
the uart, then you should be fine by setting
SERIAL_CONSOLES ?= "115200;ttyS0"
in your MACHINE config
Post by n***@polycaptil.fr
I don't understand why this problem appear when I build a OS with the sumo version on Yocto.
I have not this problem when I build a OS with the krogoth version on yocto.
Somebody can help me to solve this problem ?
what can I do ?
Greetz
--
———————————————
Josef Holzmayr
Software Developer Embedded Systems

Tel: +49 8444 9204-48
Fax: +49 8444 9204-50

R-S-I Elektrotechnik GmbH & Co. KG
Woelkestrasse 11
D-85301 Schweitenkirchen
www.rsi-elektrotechnik.de
———————————————
Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393
Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg
Ust-IdNr: DE 128592548

_____________________________________________________________
Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363
Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg
USt-IdNr.: DE 128592548

--
Heiko Schocher
2018-12-03 04:41:49 UTC
Permalink
Hi n.stanisavljevic,
Post by Josef Holzmayr
Howdy!
Post by n***@polycaptil.fr
Hello everybody
I build a custom board from schematic of sitara AM335x-evmsk starter kit.
I succeed to make a custom OS with yocto (krogoth version) and to boot this OS (embedded Linux) on my custom board.
This custom board contain a touchscreen (same touchscreen like in the AM335x-evmsk starter kit).
All worked fine on this board while I used krogoth version on yocto.
Few time ago, I decided to migrate to sumo version of yocto.
"INIT:Id'00' respawning too fast : disabled for 5 minutes" (I put a screenshot of this message ridden on putty).
Every 5 minutes I got this message and I can't acces to the user session on putty and on the touchscreen, all board is locked.
This is probably because you are basing off something that sets
SERIAL_CONSOLES for the yocto-kernel, like
http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto/tree/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf?h=master#n23
If you are using a custom tree which does not use the special driver for
the uart, then you should be fine by setting
SERIAL_CONSOLES ?= "115200;ttyS0"
in your MACHINE config
Yep, see also my patch:

https://www.mail-archive.com/***@yoctoproject.org/msg42383.html

may it help you ...

bye,
Heiko
Post by Josef Holzmayr
Post by n***@polycaptil.fr
I don't understand why this problem appear when I build a OS with the sumo version on Yocto.
I have not this problem when I build a OS with the krogoth version on yocto.
Somebody can help me to solve this problem ?
what can I do ?
Greetz
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: ***@denx.de
--
Stanisavljevic
2018-12-04 10:31:41 UTC
Permalink
Hi Holzmayr and Heiko,

My problem was solved with your advices.
I edited the serial console variable on the machine conf file of my custom machine.
It's work fine.
Thank's

n.stanisavljevic

-----Message d'origine-----
De : Heiko Schocher <***@denx.de>
Envoyé : lundi 3 décembre 2018 05:42
À : ***@polycaptil.fr
Cc : Josef Holzmayr <***@rsi-elektrotechnik.de>; ***@yoctoproject.org
Objet : Re: [yocto] am335x evmsk screen init:id"00" respawning too fast disabled for 5 minutes yocto sumo

Hi n.stanisavljevic,
Post by Josef Holzmayr
Howdy!
Post by n***@polycaptil.fr
Hello everybody
I build a custom board from schematic of sitara AM335x-evmsk starter kit.
I succeed to make a custom OS with yocto (krogoth version) and to boot this OS (embedded Linux) on my custom board.
This custom board contain a touchscreen (same touchscreen like in the AM335x-evmsk starter kit).
All worked fine on this board while I used krogoth version on yocto.
Few time ago, I decided to migrate to sumo version of yocto.
"INIT:Id'00' respawning too fast : disabled for 5 minutes" (I put a screenshot of this message ridden on putty).
Every 5 minutes I got this message and I can't acces to the user session on putty and on the touchscreen, all board is locked.
This is probably because you are basing off something that sets
SERIAL_CONSOLES for the yocto-kernel, like
http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto/tree/meta-yocto-b
sp/conf/machine/beaglebone-yocto.conf?h=master#n23
If you are using a custom tree which does not use the special driver
for the uart, then you should be fine by setting SERIAL_CONSOLES ?=
"115200;ttyS0"
in your MACHINE config
Yep, see also my patch:

https://www.mail-archive.com/***@yoctoproject.org/msg42383.html

may it help you ...

bye,
Heiko
Post by Josef Holzmayr
Post by n***@polycaptil.fr
I don't understand why this problem appear when I build a OS with the sumo version on Yocto.
I have not this problem when I build a OS with the krogoth version on yocto.
Somebody can help me to solve this problem ?
what can I do ?
Greetz
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: ***@denx.de

--
Loading...